Skip to main content
Version: 0.36

Install Astronomer Software on AWS EKS

This guide describes the steps to complete an example Astronomer Software install on Amazon Web Services (AWS), where you can deploy and scale Apache Airflow within an AWS Elastic Kubernetes Service (EKS) cluster.

For full installations, Astronomer recommends platform administrators manually install Astronomer Software using the procedures described in Install Astronomer Software.

Prerequisites​

To install Astronomer on EKS, you'll need access to the following tools and permissions:

Step 1: Choose a base domain​

All Astronomer services will be tied to a base domain of your choice, under which you will need the ability to add and edit DNS records.

Once created, your Astronomer base domain will be linked to a variety of sub-services that your users will access via the internet to manage, monitor and run Airflow on the platform.

For the base domain astro.mydomain.com, for example, here are some corresponding URLs that your users would be able to reach:

  • Software UI: app.astro.mydomain.com
  • Airflow Deployments: deployments.astro.mydomain.com/deployment-release-name/airflow
  • Grafana Dashboard: grafana.astro.mydomain.com
  • Kibana Dashboard: kibana.astro.mydomain.com

For the full list of subdomains, see Step 4.

Step 2: Spin up the EKS control plane and a Kubernetes cluster​

To proceed with the installation, you'll need to spin up an EKS control plane as well as worker nodes in your Kubernetes cluster by following this AWS guide.

EKS is built off of Amazon's pre-existing EC2 service, so you can manage your Kubernetes nodes the same way you would manage your EC2 nodes.

As you follow the guide linked above, keep in mind:

  • Each version of Astronomer Software is compatible with only a particular set of Kubernetes versions. For more information, see the Astronomer Version Compatibility Reference.
  • Astronomer recommends running the EKS control plane in a single security group. The worker nodes you spin up should have the same setup as the EKS control plane.
  • All security and access settings needed for your worker nodes should be configured in your Cloud Formation template.
  • Astronomer recommends configuring Autoscaling to automatically scale your resources up or down based on changing usage.
  • If you create an EKS cluster from the UI, kubectl access will be limited to the user who created the cluster by default.
    • To give more users kubectl access, you'll have to do so manually.
    • This post goes through how IAM plays with EKS.
  • Expect to see each of your underlying nodes in the EC2 console.
    • The default Astronomer resource requests are ~11 CPUs and ~40GiB of memory. Astronomer recommends using either six m5.xlarge or three m5.2xlarge instances for your cluster. To modify Astronomer default resource requests, see step 8.

Note: If you work with multiple Kubernetes environments, kubectx is an incredibly useful tool for quickly switching between Kubernetes clusters. Learn more here.

Step 3: Create a namespace​

Create a namespace called astronomer to host the core Astronomer platform:

kubectl create namespace astronomer

Once Astronomer is running, each Airflow Deployment that you create will have its own isolated namespace.

Step 4: Configure TLS​

Astronomer recommends running Astronomer Software on a dedicated domain (BASEDOMAIN) or subdomain (astro.BASEDOMAIN).

In order for users to access the web applications they need to manage Astronomer, you'll need a TLS certificate that covers the following subdomains:

BASEDOMAIN
app.BASEDOMAIN
deployments.BASEDOMAIN
registry.BASEDOMAIN
houston.BASEDOMAIN
grafana.BASEDOMAIN
kibana.BASEDOMAIN
install.BASEDOMAIN
alertmanager.BASEDOMAIN
prometheus.BASEDOMAIN

To obtain a TLS certificate, complete one of the following setup options:

  • Option 1: Obtain a TLS certificate from Let's Encrypt. Astronomer recommends this option for smaller organizations where the DNS administrator and Kubernetes cluster administrator are the same person or on the same team.
  • Option 2: Request a TLS certificate from your organization's security team. Astronomer recommends this option for large organizations with their own protocols for generating TLS certificates.
  • Option 3: Use the AWS Certificate Manager as the certificate provider.
warning

Astronomer requires you to use RSA to sign TLS certificates. By default, Certbot uses Elliptic Curve Digital Signature Algorithm (ECDSA) keys to sign certificates. If you're using Certbot to sign your TLS certificate, you must include -key-type rsa --rsa-key-size 2048 in your command to sign your certificate with an RSA key. If you don't use RSA keys, deploys fail and error messages appear in the registry and Houston logs. For example, you can run the following command to sign your certificate with an RSA key:

sudo certbot certonly --manual --preferred-challenges=dns -d -d *. --key-type=rsa

Option 1: Create TLS certificates using Let's Encrypt​

Let's Encrypt is a free and secure certificate authority (CA) service that provides TLS certificates that renew automatically every 90 days. Use this option if you are configuring Astronomer for a smaller organization without a dedicated security team.

To set up TLS certificates this way, follow the guidelines in Automatically Renew TLS Certificates Using Let's Encrypt. Make note of the certificate you create in this setup for Step 5.

Option 2: Request a TLS certificate from your security team​

If you're installing Astronomer for a large organization, you'll need to request a TLS certificate and private key from your enterprise security team. This certificate needs to be valid for the BASEDOMAIN your organization uses for Astronomer, as well as the subdomains listed at the beginning of Step 4. You should be given two .pem files:

  • One for your encrypted certificate
  • One for your private key

To confirm that your enterprise security team generated the correct certificate, run the following command using the openssl CLI:

openssl x509 -in  <your-certificate-filepath> -text -noout

This command will generate a report. If the X509v3 Subject Alternative Name section of this report includes either a single *.BASEDOMAIN wildcard domain or the subdomains listed at the beginning of Step 4, then the certificate creation was successful.

Depending on your organization, you may receive either a globally trusted certificate or a certificate from a private CA. The certificate from your private CA may include a domain certificate, a root certificate, and/or intermediate certificates, all of which need to be in proper certificate order. To verify certificate order, follow the guidelines below.

Option 3: Use the AWS Certificate Manager as the certificate provider​

AWS Certificate Manager (ACM) terminates TLS at the Load Balancer level and does not encrypt the internal traffic inside the cluster. The ACM ingress controller requires a TLS secret with a certificate and private key to encrypt internal traffic.

Because ACM relies on annotations attached to Kubernetes resources and does not issue certificates or private key files, you must complete one of the following options to create a secret:

  • Create a self-signed certificate. Self-signed certificates are ideal for privately hosted internal applications, as well as in development and testing environments. Avoid using self-signed certificates in installations where the trust and identity of the certificate issuer are important.
  • Create a certificate with AWS Certificate Manager Private CA.
  • Create a certificate with Let's Encrypt.

After you create the certificate, add the following configuration block to your Helm chart in Step 8, making sure to replace the <ACM-Certificate-ARN> field with the ARN of your ACM certificate.

nginx:
  loadBalancerIP: ~
  privateLoadBalancer: true  # this does affect aws-load-balancer-type: external
  ingressAnnotations:
    service.beta.kubernetes.io/aws-load-balancer-type: external
    service.beta.kubernetes.io/aws-load-balancer-nlb-target-type: ip
    service.beta.kubernetes.io/aws-load-balancer-cross-zone-load-balancing-enabled: "\"true\""
    service.beta.kubernetes.io/aws-load-balancer-ssl-cert: <ACM-Certificate-ARN>
    service.beta.kubernetes.io/aws-load-balancer-backend-protocol: ssl

Confirm certificate chain order​

If your organization is using a private certificate authority, you'll need to confirm that your certificate chain is ordered correctly. To determine your certificate chain order, run the following command using the openssl CLI:

openssl crl2pkcs7 -nocrl -certfile <your-certificate-filepath> | openssl pkcs7 -print_certs -noout

The command generates a report of all certificates. Verify the order of the certificates is as follows:

  • Domain
  • Intermediate (optional)
  • Root

If the certificate order is correct, proceed to step 5.

Step 5: Create a Kubernetes TLS Secret​

If you received a globally trusted certificate or created a self-signed certificate, create a Kubernetes TLS secret using the following command and then proceed to Step 6. The following example includes a secret named astronomer-tls, but you can custom define this name as needed:

kubectl create secret tls astronomer-tls --cert <your-certificate-filepath> --key <your-private-key-filepath> -n astronomer

If you created a certificate using Let's Encrypt, the astronomer-tls secret already exists in your Kubernetes cluster. Run the following command to confirm it exists:

kubectl describe secret astronomer-tls --namespace astronomer

If you received a certificate from a private CA, follow these steps instead:

  1. Add the root certificate provided by your security team to an Opaque Kubernetes secret in the Astronomer namespace by running the following command:

    kubectl create secret generic private-root-ca --from-file=cert.pem=./<your-certificate-filepath> -n astronomer

    Note: The root certificate which you specify here should be the certificate of the authority that signed the Astronomer certificate, rather than the Astronomer certificate itself. This is the same certificate you need to install with all clients to get them to trust your services.

    Note: The name of the secret file must be cert.pem for your certificate to be trusted properly.

  2. Note the value of private-root-ca for when you configure your Helm chart in Step 8. You'll need to additionally specify the privateCaCerts key-value pair with this value for that step.

Step 6: Configure your SMTP URI​

An SMTP service is required for sending and accepting email invites from Astronomer. If you're running Astronomer Software with publicSignups disabled (which is the default), you'll need to configure SMTP as a way for your users to receive and accept invites to the platform via email. To integrate your SMTP service with Astronomer, fetch your SMTP service's URI and store it in a Kubernetes secret:

kubectl create secret generic astronomer-smtp --from-literal connection="smtp://USERNAME:PASSWORD@HOST/?requireTLS=true" -n astronomer

In general, an SMTP URI will take the following form:

smtps://USERNAME:PASSWORD@HOST/?pool=true

The following table contains examples of what the URI will look like for some of the most popular SMTP services:

ProviderExample SMTP URL
AWS SESsmtp://AWS_SMTP_Username:AWS_SMTP_Password@email-smtp.us-east-1.amazonaws.com/?requireTLS=true
SendGridsmtps://apikey:SG.sometoken@smtp.sendgrid.net:465/?pool=true
Mailgunsmtps://xyz%40example.com:password@smtp.mailgun.org/?pool=true
Office365smtp://xyz%40example.com:password@smtp.office365.com:587/?requireTLS=true
Custom SMTP-relaysmtp://smtp-relay.example.com:25/?ignoreTLS=true

If your SMTP provider is not listed, refer to the provider's documentation for information on creating an SMTP URI.

Note: If there are / or other escape characters in your username or password, you may need to URL encode those characters.

Step 7: Configure the database​

By default, Astronomer requires a central Postgres database that will act as the backend for Astronomer's Houston API and will host individual metadata databases for all Airflow Deployments spun up on the platform.

While you're free to configure any database, most AWS users on Astronomer run Amazon RDS for PostgreSQL. For production environments, Astronomer recommends a managed Postgres solution.

Note: If you're setting up a development environment, this step is optional. Astronomer can be configured to deploy the PostgreSQL helm chart as the backend database with the following set in your values.yaml:

global:
  postgresqlEnabled: true

To connect to an external database to your EKS cluster, create a Kubernetes Secret named astronomer-bootstrap that points to your database.

kubectl create secret generic astronomer-bootstrap \
  --from-literal connection="postgres://USERNAME:$PASSWORD@host:5432" \
  --namespace astronomer

Note: You must URL encode any special characters in your Postgres password.

Note: Astronomer recommends using a t2 medium as the minimum RDS instance size.

Step 8: Configure your Helm chart​

info

To use a third-party ingress controller for Astronomer, see Third-Party Ingress Controllers.

As a next step, create a file named values.yaml in an empty directory.

For context, this values.yaml file will assume a set of default values for our platform that specify everything from user role definitions to the Airflow images you want to support. As you grow with Astronomer and want to customize the platform to better suit your team and use case, your values.yaml file is the best place to do so.

Copy and paste the following example into the values.yaml file. Replace baseDomain, private-root-ca, /etc/containerd/certs.d, astronomer.houston.secret, and ssl.enabled with your own values. Additional example configurations are available in the Astronomer GitHub configs repository.

#################################
### Astronomer global configuration
#################################
global:
  # Base domain for all subdomains exposed through ingress
  baseDomain: astro.mydomain.com

  # Name of secret containing TLS certificate
  tlsSecret: astronomer-tls

  # Enable privateCaCerts only if your enterprise security team
  # generated a certificate from a private certificate authority.
  # Create a generic secret for each cert, and add it to the list below.
  # Each secret must have a data entry for 'cert.pem'
  # Example command: `kubectl create secret generic private-root-ca --from-file=cert.pem=./<your-certificate-filepath>`
  privateCaCerts:
  - private-root-ca

  # Enable privateCaCertsAddToHost only when your nodes do not already
  # include the private CA in their docker trust store.
  # Most enterprises already have this configured,
  # and in that case 'enabled' should be false.
  privateCaCertsAddToHost:
    enabled: true
    hostDirectory: /etc/containerd/certs.d
  # For development or proof-of-concept, you can use an in-cluster database
  postgresqlEnabled: false

  # Enables using SSL connections to
  # encrypt client/server communication
  # between databases and the Astronomer platform.
  # If your database enforces SSL for connections,
  # change this value to true. Incluster postgres only supports
  # sslmode.enabled = false.
  ssl:
    enabled: false
#################################
### Nginx configuration
#################################
nginx:
  # IP address the nginx ingress should bind to
  loadBalancerIP: ~
  #  Set to 'true' when deploying to a private EKS cluster.
  privateLoadBalancer: false
  # Dict of arbitrary annotations to add to the nginx ingress. For full configuration options, see https://docs.nginx.com/nginx-ingress-controller/configuration/ingress-resources/advanced-configuration-with-annotations/
  ingressAnnotations: {service.beta.kubernetes.io/aws-load-balancer-type: nlb} # Change to 'elb' if your node group is private and doesn't utilize a NAT gateway
  # If all subnets are private, auto-discovery may fail.
  # You must enter the subnet IDs manually in the annotation below.
  # service.beta.kubernetes.io/aws-load-balancer-subnets: subnet-id-1,subnet-id-2
astronomer:
  houston:
    config:
      publicSignups: false # Users need to be invited to have access to Astronomer. Set to true otherwise
      emailConfirmation: true # Users get an email verification before accessing Astronomer
      deployments:
        manualReleaseNames: true # Allows you to set your release names
        serviceAccountAnnotationKey: eks.amazonaws.com/role-arn # Flag to enable using IAM roles (don't enter a specific role)
      email:
        enabled: true
        reply: "noreply@astronomer.io" # Emails will be sent from this address
      auth:
        github:
          enabled: true # Lets users authenticate with Github
        local:
          enabled: false # Disables logging in with just a username and password
        openidConnect:
          google:
            enabled: true # Lets users authenticate with Google
    secret:
    - envName: "EMAIL__SMTP_URL"  # Reference to the Kubernetes secret for SMTP credentials. Can be removed if email is not used.
      secretName: "astronomer-smtp"
      secretKey: "connection"

These are the minimum values you need to configure for installing Astronomer. For information on additional configuration, read What's Next.

info

If you are installing Astronomer in an airgapped environment without access to the public internet, complete all of the setup in Install in an Airgapped Environment and then skip directly to Step 10 in this document.

Step 9: Install Astronomer​

Now that you have an EKS cluster set up and your values.yaml file defined, you're ready to deploy all components of our platform.

First, run:

helm repo add astronomer https://helm.astronomer.io/

Then, run:

helm repo update

This ensures that you pull the latest image from the Astronomer Helm repository. Now, run:

helm install -f values.yaml --version=0.36 --namespace=astronomer <your-platform-release-name> astronomer/astronomer

This command installs the most recent patch version of Astronomer Software. To install a different patch version, add the --version= flag and use the format 0.36.x. For example, to install Astronomer Software v0.36.0, you specify --version=0.36.0. For more information about the available patch versions, see the Software Release Notes.

When you're defining <your-platform-release-name>, Astronomer recommends limiting the name to 12 characters to avoid operational issues.

After you run the previous commands, a set of Kubernetes pods are generated in your namespace. These pods power the individual services required to run the Astronomer platform, including the Software UI and Houston API.

Alternative ArgoCD installation​

You can install Astronomer with ArgoCD, which is an open source continuous delivery tool for Kubernetes, as an alternative to using helm install.

Because ArgoCD doesn't support sync wave dependencies for app of apps structures, installing Astronomer requires some additional steps compared to the standard ArgoCD workflow:

  1. Under the global section of your values.yaml file, add enableArgoCDAnnotation: true.

  2. Create a new ArgoCD app. When creating the app, configure the following:

    • Path: The filepath of your values.yaml file
    • Namespace: The namespace you want to use for Astronomer
    • Cluster: The Kubernetes cluster in which you're installing Astronomer
    • Repository URL: https://helm.astronomer.io

  3. Sync the ArgoCD app with every component of the Astronomer platform selected. See Sync (Deploy) the Application.

  4. Stop the sync when you see that astronomer-houston-db-migrations has completed in the Argo UI.

  5. Sync the application a second time, but this time clear astronomer-alertmanager in the Argo UI while keeping all other components selected. Wait for this sync to finish completely.

  6. Sync the ArgoCD app a third time with all Astronomer platform components selected.

Step 10: Verify Pods are up​

To verify all pods are up and running, run:

kubectl get pods --namespace <my-namespace>

You should see something like this:

$ kubectl get pods --namespace astronomer

NAME                                                       READY   STATUS              RESTARTS   AGE
astronomer-alertmanager-0                                  1/1     Running             0          24m
astronomer-astro-ui-7f94c9bbcc-7xntd                       1/1     Running             0          24m
astronomer-astro-ui-7f94c9bbcc-lkn5b                       1/1     Running             0          24m
astronomer-cli-install-88df56bbd-t4rj2                     1/1     Running             0          24m
astronomer-commander-84f64d55cf-8rns9                      1/1     Running             0          24m
astronomer-commander-84f64d55cf-j6w4l                      1/1     Running             0          24m
astronomer-elasticsearch-client-7786447c54-9kt4x           1/1     Running             0          24m
astronomer-elasticsearch-client-7786447c54-mdxpn           1/1     Running             0          24m
astronomer-elasticsearch-data-0                            1/1     Running             0          24m
astronomer-elasticsearch-data-1                            1/1     Running             0          24m
astronomer-elasticsearch-exporter-6495597c9f-ks4jz         1/1     Running             0          24m
astronomer-elasticsearch-master-0                          1/1     Running             0          24m
astronomer-elasticsearch-master-1                          1/1     Running             0          23m
astronomer-elasticsearch-master-2                          1/1     Running             0          23m
astronomer-elasticsearch-nginx-b954fd4d4-249sh             1/1     Running             0          24m
astronomer-fluentd-5lv2c                                   1/1     Running             0          24m
astronomer-fluentd-79vv4                                   1/1     Running             0          24m
astronomer-fluentd-hlr6v                                   1/1     Running             0          24m
astronomer-fluentd-l7zj9                                   1/1     Running             0          24m
astronomer-fluentd-m4gh2                                   1/1     Running             0          24m
astronomer-fluentd-q987q                                   1/1     Running             0          24m
astronomer-grafana-c487d5c7b-pjtmc                         1/1     Running             0          24m
astronomer-houston-544c8855b5-bfctd                        1/1     Running             0          24m
astronomer-houston-544c8855b5-gwhll                        1/1     Running             0          24m
astronomer-houston-upgrade-deployments-stphr               1/1     Running             0          24m
astronomer-kibana-596599df6-vh6bp                          1/1     Running             0          24m
astronomer-kube-state-6658d79b4c-hf2hf                     1/1     Running             0          24m
astronomer-kubed-6cc48c5767-btscx                          1/1     Running             0          24m
astronomer-nginx-746589b744-h6r5n                          1/1     Running             0          24m
astronomer-nginx-746589b744-hscb9                          1/1     Running             0          24m
astronomer-nginx-default-backend-8cb66c54-4vjmz            1/1     Running             0          24m
astronomer-nginx-default-backend-8cb66c54-7m86w            1/1     Running             0          24m
astronomer-prometheus-0                                    1/1     Running             0          24m
astronomer-prometheus-blackbox-exporter-65f6c5f456-865h2   1/1     Running             0          24m
astronomer-prometheus-blackbox-exporter-65f6c5f456-szr4s   1/1     Running             0          24m
astronomer-registry-0                                      1/1     Running             0          24m

If you are seeing issues here, check out our guide on debugging your installation.

Step 11: Configure DNS​

Now that you've successfully installed Astronomer, a new load balancer will have spun up in your AWS account. This load balancer routes incoming traffic to our NGINX ingress controller.

Run $ kubectl get svc -n astronomer to view your load balancer's CNAME, located under the EXTERNAL-IP column for the astronomer-nginx service.

$ kubectl get svc -n astronomer
NAME                                 TYPE           CLUSTER-IP       EXTERNAL-IP                                                               PORT(S)                                      AGE
astronomer-alertmanager              ClusterIP      172.20.48.232    <none>                                                                    9093/TCP                                     24d
astronomer-cli-install               ClusterIP      172.20.95.132    <none>                                                                    80/TCP                                       24d
astronomer-commander                 ClusterIP      172.20.167.227   <none>                                                                    8880/TCP,50051/TCP                           24d
astronomer-elasticsearch             ClusterIP      172.20.161.0     <none>                                                                    9200/TCP,9300/TCP                            24d
astronomer-elasticsearch-discovery   ClusterIP      172.20.225.200   <none>                                                                    9300/TCP                                     24d
astronomer-elasticsearch-exporter    ClusterIP      172.20.2.113     <none>                                                                    9108/TCP                                     24d
astronomer-elasticsearch-nginx       ClusterIP      172.20.154.232   <none>                                                                    9200/TCP                                     24d
astronomer-grafana                   ClusterIP      172.20.120.247   <none>                                                                    3000/TCP                                     24d
astronomer-houston                   ClusterIP      172.20.25.26     <none>                                                                    8871/TCP                                     24d
astronomer-kibana                    ClusterIP      172.20.134.149   <none>                                                                    5601/TCP                                     24d
astronomer-kube-state                ClusterIP      172.20.123.56    <none>                                                                    8080/TCP,8081/TCP                            24d
astronomer-kubed                     ClusterIP      172.20.4.200     <none>                                                                    443/TCP                                      24d
astronomer-nginx                     LoadBalancer   172.20.54.142    ELB_ADDRESS.us-east-1.elb.amazonaws.com                                   80:31925/TCP,443:32461/TCP,10254:32424/TCP   24d
astronomer-nginx-default-backend     ClusterIP      172.20.186.254   <none>                                                                    8080/TCP                                     24d
astronomer-astro-ui                  ClusterIP      172.20.186.166   <none>                                                                    8080/TCP                                     24d
astronomer-prometheus                ClusterIP      172.20.72.196    <none>                                                                    9090/TCP                                     24d
astronomer-registry                  ClusterIP      172.20.100.102   <none>                                                                    5000/TCP                                     24d

You will need to create a new CNAME record through your DNS provider using the ELB CNAME listed above. If you're using Amazon Route 53, see Creating records by using the Amazon Route 53 console.

You can create a single wildcard CNAME record such as *.astro.mydomain.com, or alternatively create individual CNAME records for the following routes:

app.astro.mydomain.com
deployments.astro.mydomain.com
registry.astro.mydomain.com
houston.astro.mydomain.com
grafana.astro.mydomain.com
kibana.astro.mydomain.com
install.astro.mydomain.com
alertmanager.astro.mydomain.com
prometheus.astro.mydomain.com

Example wildcard CNAME record: aws-elb

Step 12: Verify you can access the Software UI​

Go to app.BASEDOMAIN to see the Software UI.

Consider this your new Airflow control plane. From the Software UI, you'll be able to both invite and manage users as well as create and monitor Airflow Deployments on the platform.

Step 13: Verify your TLS setup​

To check if your TLS certificates were accepted, log in to the Software UI. Then, go to app.BASEDOMAIN/token and run:

curl -v -X POST https://houston.BASEDOMAIN/v1 -H "Authorization: Bearer <token>"

Verify that this output matches with that of the following command, which doesn't look for TLS:

curl -v -k -X POST https://houston.BASEDOMAIN/v1 -H "Authorization: Bearer <token>"

Next, to make sure the registry is accepted by Astronomer's local docker client, try authenticating to Astronomer with the Astro CLI:

astro login <your-astronomer-base-domain>

If you can log in, then your Docker client trusts the registry. If Docker does not trust the Astronomer registry, run the following and restart Docker:

mkdir -p /etc/docker/certs.d
cp privateCA.pem /etc/docker/certs.d/

Finally, try running $ astro deploy on a test deployment. Create a deployment in the Software UI, then run:

mkdir demo
cd demo
astro dev init
astro deploy -f

Check the Airflow namespace. If pods are changing at all, then the Houston API trusts the registry.

If you have Airflow pods in the state ImagePullBackoff, check the pod description. If you see an x509 error, ensure that you have:

  • Configured containerd’s config_path to point to /etc/containerd/certs.d.
  • Added the privateCaCertsAddToHost key-value pairs to your Helm chart.

If you missed these steps during installation, follow the steps in Apply a config change to add them after installation. If you are using a base image such as CoreOS that does not permit values to be changed, or you otherwise can't modify values.yaml, contact Astronomer support for additional configuration assistance.

What's next​

To help you make the most of Astronomer Software, check out the following additional resources:

Astronomer support team​

If you have any feedback or need help during this process and aren't in touch with our team already, a few resources to keep in mind:

For detailed guidelines on reaching out to Astronomer Support, reference our guide here.

Was this page helpful?